6-2
s
ervice
P/N 0501930_G
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
REPLACING FLUORESCENT LAMPS
Fluorescent lamps are furnished with moisture
resistant lamp holders, shields and end caps .
Whenever a fluorescent lamp is replaced, be
certain to reinstall the lamp shields and end
caps .
The switch in the canopy controls all lamps in
the merchandiser .
Inspect all lamp sockets and plug–receptacle
connections for signs of arcing . Replace any
component that shows signs of arcing .
Make sure all unused receptacles have their
close-off covers securely attached .
REPLACING LAMP HOLDERS AND
END CAPS
The Impact Excel lamp holder is designed to
snap into the sheet metal of the merchandiser .
The lamp holder has a locking ‘nub’ which
fits inside the groove of specially designed end
caps .
IMPORTANT!
Always replace lamp holders and end caps
with Hussmann lamp holders and end caps.
Use of non-Hussmann parts may result in
poor electrical contact and short lamp life.
Impact Excel
Lamp Holder
Nub
Impact Excel
End-Cap
Groove
Plastic Shield
End Cap
Fluorescent
Lamp
Plastic Shield
End Cap
Fluorescent
Lamp