5-2
M
aIntenance
P/N 0501930_G
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
Do:
•Remove the product and all loose debris to
avoid clogging the waste outlet .
•Store product in a refrigerated area such as a
cooler . Remove only as much product as can
be taken to the cooler in a timely manner .
•First turn off refrigeration, then disconnect
electrical power.
•Thoroughly clean all surfaces with soap and
hot water .
d
o
noT
use
sTeam
or
high
waTer
pressure
hoses
To
wash
The
inTerior
.
T
hese
will
desTroy
The
merchandisers
’
sealing
causing
leaks
and
poor
performance
.
•Lift hinged fan plenum for cleaning . Hook
chain in rear panel to secure plenum during
cleaning .
b
e
sure
To
reposiTion
The
fan
plenum
afTer
cleaning
merchandiser
.
•Take care to minimize direct contact between
fan motors and cleaning or rinse water .
•Rinse with hot water, but do NOT flood .
n
ever
inTroduce
waTer
fasTer
Than
The
wasTe
ouTleT
can
remove
iT
.
•Allow merchandisers to dry before resuming
operation .
•Wipe down lighted shelves with a damp
sponge or cloth so that water does not enter
the light channel .
d
o
noT
use
a
hose
or
submerge
shelves
in
waTer
.
•After cleaning is completed, turn on power to
the merchandiser .
CLEANING HONEYCOMB ASSEMBLIES
Honeycombs should be cleaned every six
months . Dirty honeycombs will cause
merchandisers to perform poorly . The
honeycombs may be cleaned with a vacuum
cleaner . Soap and water may be used if all
water is removed from the honeycomb cells
before replacing . Be careful not to damage the
honeycombs .
Multi-deck Cases
1 . Loosen or remove screw to free
honeycomb .
2 . Clean and dry the honeycomb .
3 . After cleaning, replace honeycomb and
slide retainer forward . Reinstall screw .
Damaged honeycomb must be replaced .
Honeycomb
Air Straightener
Retainer
Screw
Do NOT allow cleaning agent or
cloth to contact food product.
