1-14
I
nstallatIon
P/N 0501930_G
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
5. Seal End to End Frame
Remove front shelf and shelf support bracket .
Apply a
1
/
2
in . bead of Silicone at the back
of the case, starting at the first slot . Continue
across the bottom and up the front as shown
below . Use field-supplied silicone in any
gap between front support bracket and end
assembly .
6. Install End Splashguard
a . Insert back of bracket through slot in
leg . Use Screws to attach End Splashguard
Retainers to end frame .
b . Align forward edge of End
Splashguard with front splashguard, with
lower edge resting on floor . Fasten End
Splashguard to bracket with Screws .
c . Seal splashguard to floor with silicone .
Apply
Silicone
Sealant
Detail A
Solid End
Top Corner
Casting
Screws
SM 8-18x1/
2
Hex head
Detail B
Solid
Corner
Bumper
Casting
Screw
SM 8-18x
1
/
2
Hex Head
End
Splashguard
Brackets
Screw
SM 8-18x1/
2
Hex head
End
S plashguard
S c rew #8x
1
/
2
Apply Silicone
