P/N 0501930_G
1-17
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Ultra Low Front
Rear Load
Excel
BI-FOLD DOOR SETUP
The bi-fold rear loading doors are shipped
with metal cross bracing to minimize
dislocation due to vibration . All other steps
must be complete (leveling, joining, sealing to
cooler wall, and installing end) before setting
doors .
Measure each opening to ensure it is squared
(diagonal measurements must be equal). If the
opening is not squared, the merchandiser is not
level. Add shims as necessary to level the case
as described on page 1-4.
Carefully remove fasteners from ends and
center of the metal cross braces, then remove
the braces . Recycle all according to local
code .
Cut tiewraps attached to door handles to
remove horizontal stabilizing bar .
Look at each pair of doors .
• The vertical space between doors and
between door and frame should be equal .
• Compare sets of doors — spaces across top
and bottom should be about equal .
• Doors must be plumb to operate freely .
• Always use the handles to operate the
doors .
• Verify a door stop is in the track at the
center of each set of doors . The door stop
holds the doors closed and prevents excessive
vibration .
Cut Tiewraps, then
Remove Horizontal Bar
Remove and Recycle
Cross Braces and Hardware
Door Stop with Doors Closed
Door Stop with One Door Open
