Husqvarna CR 65 2012, Руководство по ремонту

Страница: 66 / 174

F.4
CR 65 2012
B
A
1
1
ENGINE DISASSEMBLY
Workshop Manual Ed. 09-2011
– Cover the crankcase with a clean cloth and place the piston on a wood sup-
port.
– Remove the piston pin retainers and gently push it out of the piston.
– Lift up the piston and remove the pin bearing from the connecting rod small
end.
– Remove the cylinder base gaskets.
Water pump disassembly
WARNING:
– It is not necessary to disassemble the water pump to remove the clutch cover.
The water pump remains inside the clutch cover.
– The water pump features a hole A where spring B is located.
– Loosen the three screws and remove the water pump with its O-rings.
– Remove the circlip ( 1 ) and slide the water pump impeller out of the shaft.
WARNING: If the water pump impeller is fastened inside the crankshaft it is pos-
sible to slide it out along with the clutch cover by loosening the cover screws.