Husqvarna CR 65 2012, Руководство по ремонту

Страница: 21 / 174

C.3
CR 65 2012
Workshop Manual Ed. 09-2011
TROUBLESHOOTING
Trouble Cause Remedy
The noise seems to come 1. Chain stretched or incorrectly adjusted Replace or adjust
from the secondary 2. Worn transmission sprockets Replace
transmission chain
The clutch slides 1. Weak clutch springs Replace
2. Worn clutch plates Replace
The clutch is tight 1. Non uniform spring load Replace
2. Bent clutch plates Replace
The gears cannot be inserted 1. Bent or seized gearbox forks Replace
2. Worn gear ratchets Replace
3. Damaged shifter fork shafts Replace
Gear shift pedal
does not return in position 1. Weak or broken selector return spring Replace
2. Worn shifter forks Replace
The gears are disengaged 1. Worn sliding gear engagements Replace
2. Worn gear grooves Replace
3. Worn dog slots in gears Replace
4. Worn selector shaft splines Replace
5. Damaged shifter fork shafts Replace
Engine power lack 1. Dirty air filter Clean
2. Carburettor main jet clogged or
Wrong size Clean or replace
3. Poor fuel quality Replace
4. Intake coupling loose Tighten
5. Spark plug electrode gap too wide Adjust
6. Insufficient compression Identify cause
The engine overheats 1. Dirty combustion chamber and/or piston crown
with carbon deposits Clean
2. Insufficient oil in crankcase or use of
wrong oil Top up or change
3. Obstructions blocking air flow on radiator Clean
4. Cylinder head gasket leaking Replace
5. Clutch slips Adjust