Husqvarna CR 65 2012, Руководство по ремонту

Страница: 161 / 174

X.5
CR 65 2012
TIGHTENING TORQUE FIGURES
Workshop Manual Ed. 09-2011
1 Nm = 0.73756 ft/lb
DESCRIPTION MEASURE Qty
NOMINAL
TORQUE
(Nm)
NOTES
Radiator retaining screw M6 2 10
Radiator retaining flanged lock nut M6 2 10
COOLING SYSTEM
NOTE: Unless otherwise specified, standard torque values for the different thread sizes are as follows
M5x0.8 5.6-6.2 Nm 0.57-0.63 Kgm 4.1-4.5 ft/lb
M6x1 7.6-8.4 Nm 0.80-0.85 Kgm 5.8-6.1 ft/lb
M8x1.25 24-26 Nm 2.4-2.6 Kgm 17.3-18.8 ft/lb
ENGINE (+/- 5%)
Primary drive sprocket hexagon nut ............ M14x1.25 (+Loxeal 100 HSP) 70 Nm 7.14 Kgm 51.6 ft/lb
Clutch hub retaining screw .......................... M10 (+Loxeal 86-54) 50 Nm 5.10 Kgm 36.9 ft/lb
Flywheel flanged nut M10x1.25/M12x1 ...... 60 Nm 6.12 Kgm 44.3 ft/lb
Cylinder head screws ................................. M7 18 Nm 1.84 Kgm 13.3 ft/lb
Cylinder base flanged nuts .......................... M8 18 Nm 1.84 Kgm 13.3 ft/lb
Clutch screws .............................................. M6 14 Nm 1.43 Kgm 10.3 ft/lb
Oil bleeding screw ....................................... M10 12 Nm 1.22 Kgm 8.9 ft/lb
Clutch cover screws .................................... M6 10 Nm 1.02 Kgm 7.4 ft/lb
Clutch hub screws ....................................... M10 48÷50 Nm 4.89÷5.10 Kgm 35.4÷36.88 ft/lb
Kick start pedal stopping plate ..................... M6 (+Loxeal 24/18) 12 Nm 1.22 Kgm 8.9 ft/lb
Stator screw................................................. M5 (+Loxeal 24/18) 8 Nm 0.82 Kgm 5.9 ft/lb
Gear stopping cam retainer ......................... M6 (+Loxeal 24/18) 10 Nm 1.02 Kgm 7.4 ft/lb
Spark plug ................................................... M14x1.25 25 Nm 2.55 Kgm 18.4 ft/lb
Engine casing screws .................................. M6 (to be greased) 10÷12 Nm 1.02÷1.22 Kgm 7.4÷8.9 ft/lb
Other engine screws .................................... M5 6 Nm 0.61 Kgm 4.4 ft/lb
Other engine screws .................................... M6 10 Nm 1.02 Kgm 7.4 ft/lb