Husqvarna CR 65 2012, Руководство по ремонту

Страница: 112 / 174

J.8
CR 65 2012
1 2
3
4
C
A
B
REAR SUSPENSION
Workshop Manual Ed. 09-2011
Chain roller, chain guide, chain slider
Check the wear of the above-mentioned elements and replace them when
necessary.
Check the chain guide alignment, and remember that a bent element
can cause chain early wear. In this case, chain might unwrap from the
sprocket.
1 Chain roller
2 Chain guide
3 Chain slider
4 Master link
Shock absorber adjustment
The rear shock absorber must be adjusted according to the rider weight and the
road conditions. IT is possible to adjust the shock absorber acting on the spring
pre-load according to the rider weight.
The shock absorber adjustment affects both the stability and the handling
of the motorcycle. We recommend to act carefully after having changed
the standard setting. BEfoRE PERfoRMING ANy ChANGE WE REC-
oMMEND to measure a reference value "A" with bike on the central stand
and rear wheel lifted from the ground.
- have the bike resting on ground without rider.
Measure dimension "A";
The difference between dimension "A" with the wheel raised off the ground
and dimension "A" with the wheel on the ground shall be 25÷30 mm (0.98 ÷
1.18 in).
- have bike resting on the ground with rider sitting on it;
Measure dimension "A";
The difference between dimension "A" with the wheel raised off the ground
and rider sitting on it shall be 60÷70 mm (2.36 ÷ 2.76 in).
B: silencer retaining screw axle
C: rear wheel axle height