Husky H301PL, Руководство оператора, Страница: 4 / 36

4 - English
GENERAL SAFETY RULES

Keep the exterior of the air compressor dry, clean, and
free from oil and grease. Always use a clean cloth when
cleaning. Never use brake fluids, gasoline, petroleum-
based products, or any strong solvents to clean the unit.
Following this rule will reduce the risk of deterioration of
the enclosure plastic.
SERVICE

Tool service must be performed only by qualified re-
pair personnel. Service or maintenance performed by
unqualified personnel may result in a risk of injury.

Disconnect power supply, open drain valve to de-
compress tank and allow water to drain, and allow
air compressor to become cool to the touch before
servicing. Turn pressure regulator knob fully counter-
clockwise after shutting off compressor.

When servicing a tool, use only identical replacement
parts. Follow instructions in the Maintenance section
of this manual. Use of unauthorized parts or failure to
follow Maintenance instructions may create a risk of
injury.
SPECIFIC SAFETY RULES

Know your air compressor. Read operator’s manual
carefully. Learn its applications and limitations, as well
as the specific potential hazards related to this tool.
Following this rule will reduce the risk of electric shock,
fire, or serious injury.

Drain tank of moisture after each day’s use.
If unit will not be used for a while, it is best to leave drain
valve open until such time as it is to be used. This will
allow moisture to completely drain out and help prevent
corrosion on the inside of tank.

Risk of Fire or Explosion. Do not spray flammable liquid
in a confined area. Spray area must be well ventilated. Do
not smoke while spraying or spray where spark or flame
is present. Keep compressors as far from the spraying
area
as possible, at least 15 feet from the spraying area
and all explosive vapors.

Risk of Bursting. Do not adjust regulator to result in
output pressure greater than marked maximum pressure
of attachment and/or the item being inflated. Never use
at pressure greater than 135 psi.

Use an air pressure gauge periodically while inflating
an item to check the air pressure.

If connected to a circuit protected by fuses, use time-
delay fuses with this product.

To reduce the risk of electric shock, do not expose to
rain. Store indoors.

Inspect tank yearly for rust, pin holes, or other
imperfections that could cause it to become unsafe.
Never weld or drill holes in the air tank.

Make sure the hose is free of obstructions or snags.
Entangled or snarled hoses can cause loss of balance or
footing and may become damaged.

Use the air compressor only for its intended use. Do
not alter or modify the unit from the original design
or function.

Always be aware that misuse and improper handling
of this tool can cause injury to yourself and others.

 Do not place over 250lbs on the work seat. Doing so
could result in damage to the tool.

Never step or stand on the work seat. Following this
rule will reduce the risk of serious personal injury.

 To reduce the risk of personal injury, do not use work
seat as a step or platform.

Never leave a tool unattended with the coil air hose
attached.

Do not operate this tool if it does not contain a legible
warning label.

Do not continue to use a tool or hose that leaks air or
does not function properly.

Always disconnect the air supply and power supply
before making adjustments, servicing a tool, or when a
tool is not in use.

Do not attempt to pull or carry the air compressor by
the hose.

Your tool may require more air consumption than this
air compressor is capable of providing.

Always follow all safety rules recommended by the
manufacturer of your air tool, in addition to all safety
rules for the air compressor. Following this rule will
reduce the risk of serious personal injury.

Never direct a jet of compressed air toward people or
animals. Take care not to blow dust and dirt towards
yourself or others. Following this rule will reduce the risk
of serious injury.