Huntleigh Smartsigns Liteplus, Инструкция по эксплуатации, Страница: 82 / 92

82
Note: Systolic and diastolic blood pressure measurements determined with this
device are equivalent to those obtained by a trained observer using the cuff/
stethoscope auscultation method, within the limits prescribed by the American
National Standard, Electronic or automated sphygmomanometers.
SpO
2
/Pulse Rate
%Saturation
Range 1% to 100%
Low Perfusion 0.03% to 20%
Accuracy
Without Interference -Adults 70% to 100% ±2 digits
1% to 69% unspeci
fi ed
Without Interference-Neonate
1
70% to 100% ±3 digits
1% to 69% unspeci fi ed
Low Perfusion 2 70% to 100% ±2 digits
1% to 69% unspeci fi ed
Pulse Rate
Range 20 BPM to 300 BPM
Accuracy
Without Interference 2 20 BPM to 300 BPM ±3 digits
Low Perfusion
2
20 BPM to 300 BPM ±3 digits
Standards ISO9919:2005
1
Neonate speci fi cations are shown for neonate sensors with the Smartsigns
®
Liteplus.
Saturation accuracy will vary by sensor type recommended by the manufacturer.
2 Speci fi cation applies to monitor performance and was validated with Biotek and Nellcor
simulators
Temperature
Probe Type Thermistor probe
Range 26° C to 43° C (80° F to 110°F)
Display Accuracy ±0.1° C (±0.2° F)
Measurement units ° C, ° F
Measurement modes Predictive, Monitored
Predictive Mode
One-time measurement in a single temperature reading which
is displayed at the end of the brief measurement period
Monitored Mode Continuous measurement over an inde fi nite period.
Standards ASTM E1112-00:2000, EN12470-3 and EN12470-4
Speci
fi ca
tions