Huntleigh Smartsigns Liteplus, Инструкция по эксплуатации, Страница: 43 / 92

43
8.2 Setup Connections
Use only provided sensor pulse oximetry cables and SpO
2
sensors with the monitor.
Biocompatibility testing has been conducted on sensors in compliance with ISO10993-1,
Biological Evaluation of Medical Devices, Part 1: Evaluation and Testing. The sensors
have passed the recommended biocompatibility testing and are therefore in compliance
with ISO10993-1.
When selecting a sensor, consider patient’s weight and activity, adequacy of perfusion,
availability of sensor sites, need for sterility, and anticipated duration of monitoring.
For more information, refer to Table 6, or contact to Huntleigh Healthcare Ltd sales
department.
Figure 23. SpO
2
Setup Connections
1. Observe all warnings and cautions in the directions for use.
2. Carefully apply the sensor to the patient, as described in the sensor directions
for use. The sensor may be connected directly to the connector. Typically,
however, it is more convenient to connect the sensor to the monitor by using
an SpO
2
pulse oximetry cable.
Table 6. SpO
2
Sensors
Sensor Model Patient Size
OXIMAX Durasensor ® Oxygen transducer
(Reusable, non-sterile)
DS-100A >40 kg
OXIMAX oxygen transducer (Sterile, single-use only) MAX-N <3 or >40 kg
OXIMAX oxygen transducer (Sterile, single-use only) MAX-A >30 kg
OXIMAX Oxyband
®
Oxygen transducer (Reusable, non-
sterile)
OXI-P/I 3 kg to 30 kg
OXIMAX adhesive re fl ectance oxygen transducer MAX-FAST >40 kg
SpO
2
Sensor/ Cable
Connector
SpO2/Pulse Ra
te Monitoring