Huntleigh Smartsigns Liteplus Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 92

Huntleigh Smartsigns Liteplus Скачать руководство пользователя страница 17

17

4. Setting up the Monitor

WARNING: The Smartsigns

®

Liteplus is a prescription device and is to be

operated by qualifi ed personnel only. It is designed for use by medical
clinicians. Although this document might illustrate medical monitoring
techniques, the monitor must be used only by trained clinicians who know
how to take and interpret a patient’s vital signs.

WARNING: In the USA, do not connect to an electrical outlet controlled by a
wall switch because the device may be accidentally turned off.

WARNING: As with all medical equipment, carefully route patient cabling to
reduce the possibility of patient entanglement or strangulation.

WARNING: To ensure patient safety, do not place the monitor in any position
that might cause it to fall on the patient.

WARNING: Do not lift the monitor by the sensor cables or power cord
because the cable could disconnect from the monitor, causing the monitor to
drop on the patient.

WARNING: Disconnect the monitor and sensors/cables during magnetic
resonance imaging (MRI) scanning. Using the monitor during MRI may cause
burns or adversely affect the MRI image or the monitor’s accuracy.

WARNING: To ensure accurate performance or prevent device failure do not
subject the monitor to extreme moisture, such as direct exposure to rain.
Such exposure may cause inaccurate performance or device failure

WARNING: Do not use the Smartsigns

®

Liteplus vital signs monitor, SpO

2

sensors, temperature probes or connectors that appear damaged.

WARNING: Discarded battery may explode during incineration. Follow local
government ordinances and recycle instructions regarding disposal or
recycling of device components, including batteries.

WARNING: Do not touch the monitor when a defi brillator is being discharged
(electrifi ed), as doing so may cause electric shock. NIBP monitoring only in
this monitor is protected against the discharge of a defi brillator. The other
functions (SPO2, TEMP) are not protected. Please be sure of no other patient
connections, except NIPB, before using the defi brillator.

WARNING: Ensure that the speaker is clear of any obstruction. Failure to do
so could result in an inaudible alarm tone.

CAUTION: If the Smartsigns

®

Liteplus is to be stored for a period of 2 months or longer, it

is recommended to notify service personnel to remove the battery from the monitor prior to
storage. Recharging the battery is strongly recommended when the battery has not been
recharged for 2 or more months.

CAUTION: Recycle used batteries properly. Do not dispose of batteries in refuse
containers.

Setting up the Monitor

«
...
15
16
17
18
19
...
»

Содержание Smartsigns Liteplus





























































































Отзывы:

Нет отзывов