manualshive.com logo in svg

Huntleigh Smartsigns Liteplus, Инструкция по эксплуатации, Страница: 21 / 92

Поделиться
Скачать
Huntleigh Smartsigns Liteplus Скачать руководство пользователя страница 21

21

Note: For the safety of patients, and to ensure the best product performance and 
accuracy, use only Huntleigh Healthcare Ltd provided tsensor pulse oximetry 
cables and SpO

2

 sensors. 

 4.6  Temperature Probes

SYS

DIA

MAP

%SpO

2

/min

°F

°C

M

mmHg

kPa

BP

1

smartsigns

LitePlus

®

Figure 6. Temperature Probe Connections

 

1.  Insert the plug into the compatible jack on the monitor right panel.

Note: For the safety of patients, and to ensure the best product performance and 
accuracy, use only Huntleigh Healthcare Ltd provided temperature probes (see 
Figure 6).

Note: The temperature probes are available from Huntleigh Healthcare Ltd sales 
department. For the safety of patients, and to ensure the best product 
performance and accuracy, use only temperature probes that have passed the 
recommended biocompatibility testing in compliance with ISO10993-1.

Temperature Probe       

Connector

Temperature Probe Well

Temperature Probe Cover

Temperature Probe

Setting up the Monitor

Содержание Smartsigns Liteplus





























































































Отзывы:

Нет отзывов