Hunter Douglas Nantucket PowerView, Установка Эксплуатация Уход

Страница: 19 / 32

OPERATION
17
Joining a Shading to a Group
IMPORTANT:
The shading will not operate using the remote until it has been joined to a group.
1. Press and hold
■
STOP on the remote until the indicator lights blink (approximately
6 seconds). The remote is now in program mode.
2. Press the desired group number (1 – 6) on the remote. The backlit group number will flash to
show it is selected.
3. While pressing the programming button on the shading, press
▲
OPEN on the remote. The
green light flashes once and the shading will move slightly twice (up, down, or down, up) to
indicate the shading has joined the group. Release the programming button.
4. Press and hold
■
STOP on the remote until the indicator lights stop blinking (approximately
6 seconds).
Basic Operation
■
To wake up the remote, simply pick it up or press
■
STOP. The last group(s) selected will be
highlighted and active.
■
Press “all” or groups 1 – 6 to select specific shading(s) to move. Selected group button(s)
will light to show they are selected.
➤
Multiple group buttons may be selected at a time.
➤
To deselect a group, press the group button again. The backlight for that group button
will go out.
■
Press
▼
CLOSE to lower the selected shading(s).
■
Press the right arrow to open the vanes.
■
Press the left arrow to close the vanes.
■
Press
▲
OPEN to raise the selected shading(s).
■
Press
■
STOP to stop shading or vane movement anywhere along its travel.
■
While a shading is in motion, press the opposite of shading motion (
▲
OPEN or
▼
CLOSE)
to reverse direction.
■
Press
♥
FAVORITE to send selected shading(s) to your preset “favorite” position. Refer to the
PowerView
®
Motorization Remote Control Guide on how to set a favorite position. The default
favorite position is the shading at 50% open.
Operating Tips
1. When the shading is raised, pressing the right arrow will first lower the shading and then
open the vanes.
2. When the shading is lowered with the vanes open, pressing
▲
OPEN will first close the vanes
and then raise the shading all the way.