Hunter Douglas Nantucket PowerView, Установка Эксплуатация Уход

Страница: 24 / 32

OPERATION
22
Problem The bottom rail does not raise or lower completely, or its location when fully
lowered has changed over time.
Solution The batteries may be low in the battery wand, satellite battery pack, or C-size
satellite battery wand. Replace the batteries.
Check that the battery wand, satellite battery pack, C-size satellite battery wand,
or 18V DC power supply is securely connected to the power cable and the cables
are not pinched or caught in the headrail or installation brackets.
Check that there is clearance between the ends of the shading and the window
casement on inside mounts.
Check if the fabric rolls up evenly into the headrail. If not, see “Adjust the Bottom
Rail Weight” on page 23.
Reset the travel limits. See “Resetting the Shading (If Necessary)” on page 19.
See the PowerView
®
Motorization Remote Control Guide for operation or
programming troubleshooting solutions.
Problem
Adjacent shadings do not roll up evenly.
Solution It is considered normal if the roll-up on both shadings is within
5
/
16
" of each
other. If one shading rolls up tighter than another, lower and raise both shadings
several times.
Reset the shading. See “Resetting the Shading (If Necessary)” on page 19.
Check that the shading fabric is not catching on any brackets or components.
Check that the fabric winds evenly and does not rub against the headrail. If
uneven, see “Adjust the Bottom Rail Weight” on page 23.