Hunter Douglas Nantucket PowerView, Установка Эксплуатация Уход

Страница: 15 / 32

INSTALLATION
13
■
Plug the power cable from the shading into
the extension cable.
■
Plug the other end of the extension cable
into the socket in the battery wand.
Proceed to “STEP 3: Install the Shading” on page 10.
18V DC Power Supply
Connect the Power Supply
■
Plug the power cable from the shading
into the extension cable.
■
Plug the other end of the extension cable
into the 18V DC power supply.
■
Plug the 18V DC power supply into a
standard outlet.
■
Secure the extension cable using wire
retainers (not supplied). If hiding the cable
behind the shading, make sure it does
not impede the operation of the shading.
■
Space the wire retainers approximately
15" apart along the power supply cable,
as shown.
WARNING: Keep cords and small
parts out of the reach of children.
They can wrap cords around their
necks and
STRANGLE .
They can
also put small parts in their mouths
and
CHOKE .
WARNING: Electric shock and/or
a fire hazard may occur, if not properly installed.
Proceed to “STEP 3: Install the Shading” on page 10.
Battery Wand Cover
Extension
Cable
Power Cable
from Shading
Power Cable
from Shading
Extension
Cable
18V DC
Power
Supply
15"
Maximum
Wire Retainers