Humminbird 1158? combo, Руководство по эксплуатации продукта

Страница: 195 / 232

183
Chart Menu Tab
Set Map Offset
(Advanced)
Settings: Press the RIGHT Cursor key and follow screen instructions to
activate.
Set Map Offset allows you to change the map offset used by your Fishing System. Press the 4-
WAY Cursor Control key to activate the cursor and move it to the location where the Map Offset
will be applied. Then, confirm the map offset position using the Set Map Offset menu setting.
The Map Offset will be applied to all maps and not just the map that requires the correction. The
Map Offset should be cleared if a different map is to be used.
NOTE: The cursor must be active in order for this procedure to work. If the cursor was not active before
you began this procedure, an error message will appear. Exit the menu, set the cursor, then try again.
Clear Map Offset
(Advanced)
Settings: Follow screen instructions to activate.
Clear Map Offset allows you to clear the Map Offset. The Clear Map Offset menu option is
available when Map Offset is active.
Shaded Depth
Settings: Off, 1 to 180 Feet, or 1 to 60 Meters [International Units only],
Default = 15 ft, 5 m
Shaded Depth allows you to change the depth used for shading on the Chart Views.
Chart Detail Level
(optional-purchase Navionics® charts only)
Settings: Basic, Navigation, Underwater, All; Default = All
Chart Detail Level allows you to select how much chart detail you want displayed on the
Navigation Views.
NOTE: Some chart details are only available with optional-purchase SD cards.
Basic shows land areas, ports, obstructions, and restricted areas.
Navigation shows navaids, landmarks, ferryways, and navigation routes in addition to
the Basic information.
Underwater shows depth contours, fishing areas, underwater wrecks, tides and
currents in addition to the Basic and Navigation information.
All shows roads, buildings, railways, and other notations in addition to the Basic,
Navigation, and Underwater information.