manualshive.com logo in svg

Hughes DIRECWAY DW7000, Руководство пользователя

Поделиться
Скачать
Hughes DIRECWAY DW7000 Скачать руководство пользователя страница 53

Chapter 4 • Troubleshooting

 

1035978-0001  Revision A

39

All LEDs are off

If all the LEDs are off, the power connections may not be secure 
or the power source may be faulty. Refer to Figure 26 and follow 
these steps:

1. Make sure the DC power cord is securely connected to the 

DC IN connector on the terminal.

2. Make sure the AC power cord is securely connected to the 

power source.
If the AC power cord is connected to a power strip or surge 
protector, make sure the power strip or surge protector is 
turned on.

3. If the LEDs are still off, determine if the power source is 

faulty:
a. Unplug the terminal AC power cord from the power outlet. 

If the terminal AC power cord is connected to a power strip 
or surge protector, unplug the power strip or surge 
protector from the power outlet.

b. Plug a small device, such as a portable radio, to the power 

outlet. If the device works, there is not a problem with the 
power source.

4. Call customer support if completing steps 1 - 3 does not 

resolve the problem.

Checking the Power LED

If the Power LED is lit, proceed to the next troubleshooting step. 
If it is not lit, wait 15 minutes before proceeding, because a 
download may be taking place.  If the LED is still off after 15 
minutes, refer to Figure 26 on page 38 and follow these steps:

1. Power cycle the terminal by unplugging the power cord from 

the power source, waiting 10 seconds, and plugging it back 
in. 

2. If the Power LED is still not lit, make sure the DC power cord 

is securely attached to the terminal.

3. If the Power LED is still not lit, plug a small device, such as a 

portable radio, into both the power strip or surge protector 
and the wall outlet or other power source. If it works, the 
power sources are functional. Call customer support for 
assistance. 

Checking the LAN LED

If the LAN LED is lit, proceed to the next troubleshooting step. If 
it is not lit, perform the following steps:

1. Check that the Ethernet cable is connected to the terminal 

LAN port and to the computer’s Ethernet port.

2. If the LAN LED is still not lit, power cycle the terminal by 

unplugging the power cord from the power source, waiting 
10 seconds, and plugging it back in. 

Содержание DIRECWAY DW7000



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды