Completed Installation:
Pegs (standers
):
Your bicycle may not have standers or it may have one of two different styles of standers. The
standers are optional. You may choose not to install them on the axles.
If your bicycle has standers that are threaded on one end, no additional tools are necessary to
install the standers.
If your bicycle has standers that are not threaded, a socket wrench, a metric socket which fits the
axle nut(s), and a three-inch extension are necessary to install the standers:
- If your bicycle has threaded standers:
- Put a stander [5] on each end of the axle and tighten
the standers securely.
- If your bicycle has standers and they are not
threaded:
- Put a stander [5] on each end of the axle
- Put a nut down
inside
each stander and
onto the end of the axle
- Tighten each nut securely.
