Pedals
CAUTIO
N:
There is a right pedal marked “R” and a left pedal marked “L”.
The pedal marked “R” has right-hand threads. Tighten it in a clockwise direction.
The pedal marked “L” has left-hand threads. Tighten it in a
counterclockwise direction.
Make sure you turn the pedal marked “L” into the left side
of the crank.
Turn the right pedal marked “R” [1] into the right side of
the crank and the left pedal marked “L” [2] into the left
side of the crank.
Tighten the pedals:
- Make sure the threads of each pedal are fully into the crank
- The recommended torque (tightness) for each pedal is 23 ft.-lbs.
Accessories
Your bicycle may have one of the following accessories. Use the following instructions to
install the accessory for your bicycle.
WARNING:
Make sure that you assemble each accessory so it does not interfere with the correct
movement or operation of the steering or braking of the bicycle.
Water Bottle:
WARNING:
Thoroughly wash any water bottle before you use it.
WARNING:
Do not use a water bottle while riding. Always fully stop the bicycle before you
use the water bottle. Make sure the water bottle stays fully seated in/on the mount, clamp, or
cage while you ride.
Water Bottle with Cage (on some models):
Install each cage and water bottle:
- Using two screws, assemble each cage to the bicycle
frame.
- Make sure the open end of each cage points up or
toward the front of the bicycle
- Push each water bottle into the cage.
Mini Water Bottle with Clamp (on some models):
Install each clamp and water bottle:
- Assemble the clamp to the down tube so the bottle
does not touch the crank or the pedals
- Push a thread protector on the end of the bolt
- Push water bottle onto the mount.
