Seat Bag:
Attach the seat bag to the bottom of the seat and to
the seat post:
- Open the fasteners [19] of the seat bag [20]
- Put the seat bag against the bottom of the seat
- Wrap the fasteners around the seat post and
around the frame that is under the seat as
shown
- Feed the strap end without the plastic loop
sewn to it through the plastic loop [21] of the
other end, and attach it back onto itself with the
hook & loop fastener
WARNING:
Some models have rear reflectors mounted to the seatpost. Make sure the position of
the rear bag does not interfere with the visibility of the rear reflector when viewed from behind.
WARNING:
Do not carry any items in the seat bag which weigh more than two (2) pounds.
Fully stop the bicycle before you open or close the seat bag.
NOTE:
Your bicycle may have one or more of the following accessories. Use the following instructions
to install the accessories for your bicycle.
WARNING:
Make sure that you assemble each accessory so it does not interfere with the correct
movement or operation of the steering or braking of the bicycle.
WARNING:
Do not steer the bicycle by holding onto any of these accessories. When your
hands are off the handlebar grips, your ability to control the bicycle is decreased.
Handlebar Basket and Handlebar Bags:
BASKET:
Assemble the basket to the handlebar:
- Insert the screws with washer [1] as shown through
handlebar mounting bracket, making sure to place
the flat washer with elongated holes [2] between the
round washer and the plastic basket.
- Tighten with nuts [3] on backside.
BAGS:
There are several different styles of bags, but all
bags attach with simple hook & loop enclosures around
the handlebar cross bar or around the cross bar pad.
19
20
21
101M
hook & loop enclosures
