Frame Bag (on some models):
WARNING:
Attach a frame bag to the bicycle frame as written in these instructions:
- Do not attach a frame bag to any other part of the bicycle
- Fully stop the bicycle before you open or close the frame bag
- If the frame bag has a water bottle, fully stop the bicycle before you get the water bottle from or
return the water bottle to the frame bag.
Assemble the frame bag to the bicycle frame:
- Loosen the fasteners on the frame bag
- Put the frame bag under the top tube and in front of the seat tube of the bicycle frame
- Wrap each fastener around the frame tube and press it together.
NOTE:
Fully wash the water bottle before use.
WARNING:
Make sure that you assemble each accessory so it does not interfere with the correct
movement or operation of the steering or braking of the bicycle.
WARNING:
Do not steer the bicycle by holding onto any of these accessories. When your
hands are off the handlebar grips, your ability to control the bicycle is decreased.
Streamers (on some models):
Assemble a streamer to each grip:
- Push the arrowhead or the plug of a streamer fully into
the end of each grip.
- Check each by gently pulling on the streamer.
If it pulls out, re-install it, and check again.
Bell (on some models):
Assemble the bell on the handlebar:
-
Put the bell in a position that is comfortable to the rider.
-
Place the lower bracket on the underside of the handlebar.
-
Insert and tighten the 2 screws.
-
Ensure the assembly is tight and will not come off.
Kickstand:
Assembly
Assemble the kickstand to the bicycle frame:
- Put the kickstand [1] under the bicycle frame
- Assemble the hardware to the kickstand and the
bicycle frame
- Align the kickstand with the bicycle frame
- Tighten the bolt
- The kickstand may be adjustable. If so, loosen
screw [2] and move kickstand in or out so bicycle is
stable when standing
- Tighten screw.
