Introduction
This Owner’s Manual is made for several different bicycles. All features and components are not included on
all models. Some of the illustrations may not look exactly like the parts of the bicycle, but the instructions are
correct. If the bicycle has any parts that are not described in this manual, look for separate “Special
Instructions” that are supplied with the bicycle.
Do not dispose of the carton and packaging until you complete the assembly of the bicycle. This can prevent
accidentally discarding parts of the bicycle.
NOTE:
All of the directions (right, left, front, rear, etc.) in this manual are as seen by the rider while seated
on the bicycle.
Attach and use only HBC brand accessories and replacement parts on the bicycle.
Tools Needed
Small
Adjustable
Wrench
Large
Adjustable
Wrench
(Jaws must open at least 9/16 inch.)
(Jaws must open at least 1 1/4 inch.)
Flat-blade
Screwdriver
Phillips
Screwdriver
Slip-Joint
Pliers
Metric
Allen
Wrenches
(Needed on some models.)
Important Note
All features and components are not included on all models.
Many models come with accessories such as bottles, handlebar fairings, streamers etc... that may
affect the order of the assembly of the bicycle. Please look over all of the pieces that come with your
new bicycle and refer to the back section of the manual to see if there are any special requirements
associated with that accessory before beginning assembly.
