Huawei UPS2000-G-1KRTL Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 78

Huawei UPS2000-G-1KRTL Скачать руководство пользователя страница 8

UPS2000-G-(1 kVA-3 kVA)
User Manual

1 Precautions

Issue 08 (2017-08-04)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

1

1

Precautions

1.1 Transportation

Before transporting the UPS, pack it with original packing materials to protect it from
collision.

1.2 Preparation



The UPS may have condensation inside after it is moved from a cold environment to a
warm environment, such as an indoor environment. In this case, install the UPS after it is
completely dry. Therefore, install the UPS at least 2 hours after it is placed in the target
place.



Never install the UPS in a damp environment or a place with water nearby.



Never install the UPS in a place exposed to sunlight or with a heater nearby.



Never block or shield the air vents on the UPS shell.

1.3 Operating Environment



A UPS can be used to serve resistive-capacitive loads, resistive loads, and
micro-inductive loads. It does not apply to pure capacitive loads, pure inductive loads,
and half-wave rectification loads. It does not apply to energy feedback loads.

Do not place the device in an environment that has inflammable and explosive air or gas. Do
not perform any operation in this kind of environment.

Any operation on any electrical device in an environment that has inflammable air can cause
extreme danger. Strictly obey the operating environmental requirements specified in related
use manuals when using or storing the device.

Donnot places the UPS in the following environments:

«
...
6
7
8
9
10
...
»

Содержание UPS2000-G-1KRTL















































































Отзывы:

Нет отзывов