name
gateway-address
|
gateway-address
} [
preference
preference
] [
track
bfd-session
cfg-
name
] [
description
description
] command to configure a static route to the site.
You must specify the next hop address on the local device.
----End
11.4.3 (Optional) Configuring RIP Between an MCE and a Site
Context
Do as follows on the MCE.
You need to configure only routing protocols on a device in a site.
Procedure
Step 1
Run the
system-view
command to enter the system view.
Step 2
Run the
rip
[
process-id
]
vpn-instance
vpn-instance-name
command to create and enable a
RIP process used by a VPN instance and enter the RIP view.
Step 3
Run the
network
network-address
command to enable RIP routes on the network segment where
the IP address of the VLANIF interface bound to the VPN instance belongs.
Step 4
(Optional) Run the
import-route
{ {
static
|
direct
} | { {
rip
|
ospf
|
isis
} [
process-id
] } }
[
cost
cost
|
route-policy
route-policy-name
]
*
command to import routes from other routing
protocols.
If another routing protocol is run between an MCE and a PE in this VPN, you need to perform
this step.
----End
11.4.4 (Optional) Configuring OSPF Between an MCE and a Site
Context
Do as follows on the MCE.
You need to configure only routing protocols on a device in a site.
Procedure
Step 1
Run the
system-view
command to enter the system view.
Step 2
Run the
ospf
[
process-id
|
router-id
router-id
|
vpn-instance
vpn-instance-name
]
*
command
to create an OSPF process used by a VPN instance and enter the OSPF view.
NOTE
In this step, you must specify
vpn-instance
vpn-instance-name
.
Step 3
(Optional) Run the
import-route
{
limt
limt-number
|
protocol
[
process-id
] [
cost
cost
|
route-
policy
route-policy-name
|
tag
tag
|
type
type
]
*
} command to import routes from other routing
protocols.
S6700 Series Ethernet Switches
Configuration Guide - IP Routing
11 MCE Configuration
Issue 01 (2012-03-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
634
