Context
Do as follows on the switch that runs OSPF:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
ospf
[
process-id
]
An OSPF process is enabled and the OSPF view is displayed.
Step 3
Run:
filter-policy
{
acl-number
|
acl-name
acl-name
|
ip-prefix
ip-prefix-name
}
import
The filtering policy is configured for routes received by OSPF.
----End
10.5.4 Filtering Routes Received by IS-IS
By applying filters, you can control the receiving of IS-IS routes.
Context
Do as follows on the switch that runs IS-IS:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
isis
[
process-id
] [
vpn-instance
vpn-instance-name
]
An IS-IS process is enabled and the IS-IS view is displayed.
Step 3
Run:
filter-policy
{
acl-number
|
acl-name
acl-name
|
ip-prefix
ip-prefix-name
|
route-
policy
route-policy-name
}
import
You can configure IS-IS to filter the received routes to be added to the IP routing table.
----End
10.5.5 Filtering Routes Received by BGP
By applying filters, you can control the receiving of BGP routes.
S6700 Series Ethernet Switches
Configuration Guide - IP Routing
10 Routing Policy Configuration
Issue 01 (2012-03-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
604
