manualshive.com logo in svg

Huawei S6700 Series, Руководство по настройке

Поделиться
Скачать
Huawei S6700 Series Скачать руководство пользователя страница 321

Procedure

l

Configure the IS-IS preference value.
1.

Run:

system-view

The system view is displayed.

2.

Run:

isis

 [ 

process-id

 ]

The IS-IS view is displayed.

3.

Run:

ipv6 preference

 

preference

The IS-IS preference value is configured.

NOTE

A smaller 

preference

 value indicates a higher preference.

The default IS-IS preference value is 

15

.

l

Configure preference values for specified IS-IS routes.
1.

Run:

system-view

The system view is displayed.

2.

Run:

isis

 [ 

process-id

 ]

The IS-IS view is displayed.

3.

Run:

ipv6 preference

 

route-policy

 

route-policy-name

 

preference

The preference values are configured for the specified IS-IS routes.

NOTE

preference

 takes effect only for IS-IS routes that match the specified routing policy.

----End

6.14.3 Configuring IPv6 IS-IS to Advertise a Default Route

To forward all traffic in an IS-IS area through a default route, configure IS-IS on a Level-1-2
device to advertise the default route.

Context

Only the route ::/0 can be advertised as a default route on a Level-1-2 device. All traffic destined
for other areas is first forwarded to the Level-1-2 device.

To ensure successful traffic forwarding, external routes must be learned on the Level-1-2 device.

NOTE

Configuring static default routes can also achieve the function of interaction between different routing
protocols, but require large configurations and are difficult to manage.
If multiple Level-1-2 devices are deployed, a routing policy can be configured to allow only the Level-1-2
device that meets the specified conditions to advertise a default route, preventing blackhole routes.

S6700 Series Ethernet Switches
Configuration Guide - IP Routing

6 IS-IS Configuration

Issue 01 (2012-03-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

302

Содержание S6700 Series

























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды