manualshive.com logo in svg

Huawei S6700 Series, Руководство по настройке

Поделиться
Скачать
Huawei S6700 Series Скачать руководство пользователя страница 306

This command configuration takes effect only on the local IS-IS device. The value of

symbolic-name

 will not be added to LSP packets.

If dynamic host name mappings is configured on an IS-IS network, the mappings on
the network overwrite the mappings configured on the local switch.

l

(Optional) Enable the output of the IS-IS adjacency status.
1.

Run:

system-view

The system view is displayed.

2.

Run:

isis

 [ 

process-id

 ]

An IS-IS process is created, and the IS-IS view is displayed.

3.

Run:

log-peer-change

The output of the adjacency status is enabled.

----End

6.11.3 Configuring IPv6 IS-IS Interfaces

To configure an interface on an IS-IS device to send Hello packets or flood LSPs, IS-IS must
be enabled on this interface.

Context

The level of an IS-IS device and level of an interface together determine the level of a neighbor
relationship. By default, Level-1 and Level-2 neighbor relationships will be established between
two Level-1-2 devices. If only one level of neighbor relationships is required, you can configure
the level of an interface to prevent the establishment of the other level of neighbor relationships.

After IS-IS is enabled on an interface, the interface will automatically send Hello packets,
attempting to establish neighbor relationships. If a peer device is not an IS-IS device or if an
interface is not expected to send Hello packets, suppress the interface. Then this interface only
advertises routes of the network segment where the interface reside, but does not send Hello
packets. This suppression improves the link bandwidth usage.

Procedure

l

Configure an IS-IS interface.
1.

Run:

system-view

The system view is displayed.

2.

Run:

interface

 

interface-type

 

interface-number

The interface view is displayed.

3.

Run:

ipv6 enable

The IPv6 of interface is enabled.

S6700 Series Ethernet Switches
Configuration Guide - IP Routing

6 IS-IS Configuration

Issue 01 (2012-03-15)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

287

Содержание S6700 Series

























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды