Huawei RH8100 V3 Скачать руководство пользователя страница 73

Страница: 73 / 386

Hard disk

FM-D

Hard disk backplane

Supercapacitor (optional)

Front I/O board of model D

(FIO-D)

RAID-1

RAID-2

Table 2-32

describes the FM-D components.

Table 2-32 FM-D component description

No. Item

Description

Hard disk

Hard disks are hot-swappable and store data for the RH8100

V3. The FM-D supports a maximum of eight 2.5-inch SAS

HDDs, SATA HDDs, SSDs, or NVMe PCIe SSDs.

FM-D

The FM-D supports hard disks, RAID controller cards, and a

supercapacitor.

Hard disk

backplane

The hard disk backplane provides ports for connecting to hard

disks and RAID controller cards.

Supercap

acitor

The supercapacitor provides power failure protection for a

RAID controller card with the LSISAS3108 chip.

FIO-D

The FIO-D houses a RAID controller card and provides the

management function.

6/7 RAID

controller

card

The FM-D supports SR430C (LSISAS3108) RAID controller

cards, and supports multiple RAID levels, RAID level

migration, and drive roaming.
SR430C (LSISAS3108) RAID controller cards supports RAID 0,

1, 5, 6, 10, 50, and 60, and supercapacitors for power failure

protection.
The FM-D supports two RAID controller cards, which are

configured for different compute modules.
● RAID-1 is configured for compute module 1.
● RAID-2 is configured for compute module 5.

NOTE

● If compute module 1 or 5 is not installed, the corresponding RAID

controller card is unavailable.

● NVMe PCIe SSDs do not support RAID. If NVMe PCIe SSDs are

installed in all disk slots, no RAID controller cards need to be

configured on the server.

RH8100 V3 Server

User Guide

2 About the RH8100 V3

Issue 30 (2019-12-19)

Содержание RH8100 V3



































































































































































































































































































































































































Результаты поиска

Содержание RH8100 V3

Отзывы:

Похожие инструкции для RH8100 V3

Бренды по названию

Популярные бренды

Huawei RH8100 V3, Руководство пользователя

Результаты поиска

Содержание RH8100 V3

Отзывы:

Похожие инструкции для RH8100 V3

Бренды по названию

Популярные бренды