IPC6521-Z20-FI 1080P Intelligent Network Speed
Dome
User Guide
F Appendix help Command Reference
Issue 02 (2013-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
123
Step 5
Run the
./help debug close
module ID
command to disable the debug log.
For example:
./help debug close 1
The debug log is automatically disabled 10 minutes after the debug log is enabled.
----End
Configuring Media Streams
Step 1
Run the
cd /usr/app/bin/
command.
Step 2
Run the
./help setmediaopen
command.
The command output is displayed:
Usage: help setmediaopen [VideoStreamType] [ProtocolType] [IPAddress] [Port]
[PacketType] [LocalEthNo]
Set Media Stream open.
VideoStreamType:
0 Host Stream
1 Sub Stream One
2 Sub Stream Two
ProtocolType:
0 UDP
2 Multicast
Port:need to input even numbers.
PacketType:The type of media packet.
0 ES stream packet
1 PS stream packet
LocalEthNo:
0 Wire Network card
1 Wireless Network card
Without this parameter, the default use Wire Network card.
Step 3
Enter the media stream type, transmission protocol, IP address and port number for receiving
media streams, pocket type, and network port as prompted.
The port number must be an even number that ranges from 1001 to 65535; otherwise, the
command is invalid.
For example:
./help setmediaopen 0 0 192.168.0.200 10000 0 0
.
Step 4
Run the
./help setmediaclose [SessionID]
command.
The configured media streams can be disabled.
