Huawei eSpace 7950 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 77

background image

eSpace 7950 IP Phone
User Manual

1 Safety Precautions

Issue 06 (2013-08-04)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

2



Ensure that the device does not get wet. If water gets into the device, disconnect the
power supply immediately and unplug all the cables connected to the device, such as the
power cable and the telephone cable, and then contact an authorized maintenance center.



When installing the device, comply with Limited Power Source (LPS) and local electric
security standards, and use the power supply of safety extra low voltage (SELV).



Before connecting or disconnecting any cable, shut down the device and disconnect the
power supply.



While connecting or disconnecting any cable, ensure that your hands are dry.



Do not step on, pull, or bend any cable excessively; doing so may result in the cable may
be damaged, leading to device malfunction.



Do not use old or damaged cables.



Keep the power plug clean and dry, to prevent electric shock or dangerous situations.



During lightning, disconnect the device from the power supply, and unplug all the cables
connected to the device, such as the power cable and the telephone cable, to avoid
lightning strike.



If the device is unused for a long time, disconnect the power supply and unplug the
power plug.



If smoke, unusual sound, or smell is emitted from the device, stop using the device
immediately, disconnect the power supply, and unplug the power supply and other cables.
Contact an authorized maintenance center for advice and repair.



Make sure that no objects (such as metal shavings) enter the device through the speaker.

Cleaning Requirements



Before cleaning the device, stop using it, disconnect the power supply, and unplug all the
cables connected to the device, such as the power cable and the telephone cable.



Do not clean the device exterior with any cleaning solution or cleanser spray. Use a piece
of soft cloth to clean the device shell.

LCD Usage Requirements



Do not expose the LCD to direct sunlight.



Do not press, scratch, or damage the LCD; do not place heavy objects on top of it.



Do not stare at the display screen for a long time. This may harm your eyes or blur your
vision.

LCD Cleaning Requirements



According to the instructions given in the attached manual, use a piece of soft cloth to
remove dust from the surface of the LCD.



Do not clean the screen with volatile solvent, such as alcohol, benzene or dilution agent.
Do not touch the screen with rubber or plastic material for a long time. This will
deteriorate the surface gloss of the LCD.

Environmental Protection

Do not dispose of the device and the accessories in a garbage can. Dispose of the device
according to the local regulations on disposing of packing materials, exhausted batteries and
abandoned devices, and support the recycling activity.

«
...
9
10
11
12
13
...
»

Содержание eSpace 7950














































































Отзывы:

Нет отзывов

Похожие инструкции для eSpace 7950

Бренд: NEC Страницы: 36

Бренд: NEC Страницы: 4

Бренд: NEC Страницы: 3

Бренд: Fanvil Страницы: 16

Бренд: i.safe MOBILE Страницы: 49

Бренд: i.safe MOBILE Страницы: 37

Бренд: Alcatel Страницы: 22

Бренд: Archos Страницы: 75

Бренд: Slican Страницы: 50

Бренд: SMART Страницы: 16

Бренд: UTStarcom Страницы: 54

Бренд: AMGOO Страницы: 44

Бренд: iData Страницы: 38

Бренд: SSS Siedle Страницы: 14

Бренд: T-Mobile Страницы: 43

DROID DROID INCREDIBLE

Бренд: HTC Страницы: 206

Бренд: Alcatel Страницы: 58

Бренд: VERTIS Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды