lp-445-r4 Rev. 006 Rel. 027 Date 7.21.20
63
MODCON Boiler
Limited Warranty
Ten year warranty to assure your complete satisfaction.
HTP warrants this boiler and its components to be free from
defects in material and workmanship according to the following
terms, conditions, and time periods.
UNLESS OTHERWISE NOTED
THESE WARRANTIES COMMENCE ON THE DATE OF INSTALLATION.
This limited warranty is only available to the
original consumer
purchaser
(herinafter “Owner”) of this boiler, and is non-transferable.
COVERAGE
A. During the first year after the date of installation, HTP warrants
that it will repair or replace, at its option, any defective or
malfunctioning component of the boiler that is found to have failed
due to manufacturer’s defect. Replacement components will be
warranted for ninety (90) days. No other component of the boiler will
be replaced after this period (with exception to the blower motor,
which will have a limited warranty of three [3] years).
B. During the first through fifth year after the date of installation, should
a defect or malfunction result in a leakage of water from the boiler
due to defective material or workmanship, malfunction, or failure to
comply with the above warranty, with such defect or malfunction
having been verified by an authorized HTP representative, HTP will
repair or replace, at its option, the defective or malfunctioning boiler.
Replacements will be of the nearest comparable model available at
the time of replacement. The replacement boiler will be warranted
for the unexpired portion of the applicable warranty period of the
original boiler.
C. During the sixth through tenth year after the date of installation,
should a defect or malfunction result in a leakage of water from
the boiler due to defective material or workmanship, malfunction,
or failure to comply with the above warranty, with such defect
or malfunction having been verified by an authorized HTP
representative, HTP will repair or replace, at its option, the defective
or malfunctioning boiler at a cost to the Owner equal to the following
percentages of the manufacturer’s list price in effect at the date of
replacement:
Year of Claim
6
7
8
9
10
Percentage to be Paid
by Purchaser
50 %
60 %
70%
80 %
90 %
Replacements will be of the nearest comparable model available at
the time of replacement. The replacement boiler will be warranted
for the unexpired portion of the applicable warranty period of the
original boiler.
D. In the event of a leakage of water of a replacement boiler due
to defective material or workmanship, malfunction, or failure to
comply with the above warranty, HTP reserves the right to refund
to the Owner the published wholesale price available at the date of
manufacture of the original boiler.
E. If government regulations, industry certification, or similar
standards require the replacement boiler or component(s) to have
features not found in the defective boiler or component(s), the Owner
will be charged the difference in price represented by those required
features. If the Owner pays the price difference for those required
features and/or to upgrade the size and/or other features available
on a new replacement boiler or component(s), the Owner will also
receive a complete new limited warranty for that replacement boiler
or component(s).
F. If at the time of a request for service the Owner cannot provide
a copy of the original sales receipt or the warranty registration,
the warranty period for the boiler shall then be deemed to have
commenced thirty (30) days after the date of manufacture of the
boiler and NOT the date of installation of the boiler, and be covered
by the unexpired portion of the warranty detailed above.
G. This warranty extends only to boilers utilized in closed loop
heating applications that have been properly installed based upon
the manufacturer’s installation instructions.
H. It is expressly agreed between HTP and the Owner that repair,
replacement, or refund are the exclusive remedies of the Owner.
OWNER RESPONSIBILITIES
The Owner or Qualified Installer / Service Technician must:
1. Have a relief valve bearing the listing marks of the American Society
of Mechanical Engineers (ASME) installed with the boiler assembly in
accordance with federal, state, and local codes.
2. Maintain the boiler in accordance with the maintenance procedure
listed in the manufacturer’s provided instructions. Preventive
maintenance can help avoid any unnecessary breakdown of the
boiler and keep it running at optimum efficiency.
3. Maintain all related system components in good operating
condition.
4. Check all condensate lines to confirm that all condensate drains
properly from the boiler.
5. Use the boiler in a closed system with a properly sized and installed
thermal expansion tank.
6. Use the boiler at water pressures not exceeding the working
pressure shown on the rating plate.
7. Keep the boiler free of damaging scale deposits.
8. Make provisions so if the boiler or any component or connection
thereto should leak, the resulting flow of water will not cause damage
to the area in which it is installed.
WARRANTY EXCLUSIONS
This limited warranty will not cover:
1. Any boiler purchased from an unauthorized dealer.
2. Any boiler not installed by a qualified heating installer/service
technician, or installations that do not conform to ANSI, CSA, and/
or UL standards, as well as any applicable national or local building
codes.
3. Service trips to teach the Owner how to install, use, maintain, or
to bring the boiler installation into compliance with local building
codes and regulations.
4. The workmanship of any installer. The manufacturer disclaims
and does not assume any liability of any nature caused by improper
installation, repair, or maintenance.
5. Electricity or fuel costs, or increased or unrealized savings for same,
for any reason whatsoever.
6. Any water damage arising, directly or indirectly, from any defect in
the boiler or component part(s) or from its use.
7. Any incidental, consequential, special, or contingent damages or
expenses arising, directly or indirectly, from any defect in the boiler
or the use of the boiler.
8.
Failure to locate the boiler in an area where leakage of the boiler or
water line connections and the relief valve will not result in damage to
the area adjacent to the boiler or lower floors of the structure, as well
as failure to install the boiler with properly designed containment
measures.
9. Any failed components of the system not manufactured by HTP as
part of the boiler.
10. Boilers repaired or altered without the prior written approval of
HTP.
11. Damages, malfunctions, or failures resulting from failure to install
the boiler in accordance with applicable building codes/ordinances
or good plumbing and electrical trade practices.
12. Damages, malfunctions, or failures resulting from improper
installation, failure to operate the boiler at firing rates or pressures
not exceeding those on the rating plate, or failure to operate and
maintain the boiler in accordance with the manufacturer’s provided
instructions.
13. Failure to operate the boiler in a closed system with a properly
Содержание MODCON500 FS
Страница 34: ...lp 445 r4 Rev 006 Rel 027 Date 7 21 20 34 Figure 26 Cascade Master and Follower Wiring ...
Страница 61: ...lp 445 r4 Rev 006 Rel 027 Date 7 21 20 61 Figure 34 Water Side Replacement Parts All Models ...
Страница 62: ...lp 445 r4 Rev 006 Rel 027 Date 7 21 20 62 Figure 35 Cabinet Replacement Parts All Models See Table ...
Страница 65: ...lp 445 r4 Rev 006 Rel 027 Date 7 21 20 65 Maintenance Notes ...
