HPE FlexNetwork 10500 SERIES Скачать руководство пользователя страница 349

Страница: 349 / 407

338

Table 38 RPC methods

RPC method

Description

Get

The ACS obtains the values of parameters on the CPE.

Set

The ACS modifies the values of parameters on the CPE.

Inform

The CPE sends an Inform message to the ACS for the following purposes:

•

Initiates a connection to the ACS.

•

Reports configuration changes to the ACS.

•

Periodically updates CPE settings to the ACS.

Download

The ACS requires the CPE to download a configuration or software image file from a
specific URL for software or configuration update.

Upload

The ACS requires the CPE to upload a file to a specific URL.

Reboot

The ACS reboots the CPE remotely for the CPE to complete an upgrade or recover
from an error condition.

Autoconnect between ACS and CPE

The CPE automatically initiates a connection to the ACS when one of the following events occurs:

•

ACS URL change. The CPE initiates a connection request to the new ACS URL.

•

CPE startup. The CPE initiates a connection to the ACS after the startup.

•

Timeout of the periodic Inform interval. The CPE re-initiates a connection to the ACS at the
Inform interval.

•

Expiration of the scheduled connection initiation time. The CPE initiates a connection to the
ACS at the scheduled time.

CWMP connection establishment

As shown in

Figure 97

, the CPE and the ACS use the following process to establish a connection:

After obtaining the basic ACS parameters, the CPE initiates a TCP connection to the ACS.

If HTTPS is used, the CPE and the ACS initialize SSL for a secure HTTP connection.

The CPE sends an Inform message in HTTPS to initiate a CWMP session.

After the CPE passes authentication, the ACS returns an Inform response to establish the
session.

After sending all requests, the CPE sends an empty HTTP post message.

If the ACS wants to point the CPE to a new ACS URL, the ACS queries the ACS URL set on the
CPE.

The CPE replies with its ACS URL setting.

The ACS sends a Set request to modify the ACS URL on the CPE.

After the ACS URL is modified, the CPE sends a response.

10.

The ACS sends an empty HTTP message to notify the CPE that it has no other requests.

11.

The CPE closes the connection, and then initiates a new connection to the new ACS URL.

Содержание FlexNetwork 10500 SERIES
























































































































































































































































































































































































































Результаты поиска

Содержание FlexNetwork 10500 SERIES

Отзывы:

Похожие инструкции для FlexNetwork 10500 SERIES

Бренды по названию

Популярные бренды

HPE FlexNetwork 10500 SERIES, Руководство по настройке

Результаты поиска

Содержание FlexNetwork 10500 SERIES

Отзывы:

Похожие инструкции для FlexNetwork 10500 SERIES

Бренды по названию

Популярные бренды