HPE FlexNetwork 10500 SERIES Скачать руководство пользователя страница 164

Страница: 164 / 407

153

information about which event notifications you can subscribe to, see the system log messages
reference for the device.

A subscription takes effect only on the current session. If the session is terminated, the subscription
is automatically canceled.

You can send multiple subscription messages to subscribe to notification of multiple events.

Subscription procedure

# Copy the following message to the client to complete the subscription:

<?xml version="1.0" encoding="UTF-8"?>

<create-subscription xmlns="urn:ietf:params:xml:ns:netconf:notification:1.0">

<stream>NETCONF</stream>

<Group>group</Group>

<Severity>severity</Severity>

</event>

</filter>

<startTime>start-time</startTime>

</create-subscription>

</rpc>

The <stream> parameter represents the event stream type supported by the device. Only
NETCONF is supported.

The <event> parameter represents an event to which you subscribe.

The <code> parameter represents a mnemonic symbol.

The <group> parameter represents the module name.

The <severity> parameter represents the severity level of the event.

The <start-time> parameter represents the start time of the subscription.

The <stop-time> argument represents the end time of the subscription.

After receiving the subscription request from the client, the device returns a response in the following
format if the subscription is successful:

<?xml version="1.0" encoding="UTF-8"?>

<rpc-reply message-id="101" xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0">

<ok/>

</rpc-reply>

If the subscription fails, the device returns an error message in the following format:

<?xml version="1.0" encoding="UTF-8"?>

<rpc-reply message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

<rpc-error>

<error-type>error-type</error-type>

<error-tag>error-tag</error-tag>

<error-severity>error-severity</error-severity>

<error-message xml:lang="en">error-message</error-message>

Содержание FlexNetwork 10500 SERIES
























































































































































































































































































































































































































Результаты поиска

Содержание FlexNetwork 10500 SERIES

Отзывы:

Похожие инструкции для FlexNetwork 10500 SERIES

Бренды по названию

Популярные бренды

HPE FlexNetwork 10500 SERIES, Руководство по настройке

Результаты поиска

Содержание FlexNetwork 10500 SERIES

Отзывы:

Похожие инструкции для FlexNetwork 10500 SERIES

Бренды по названию

Популярные бренды