HPE FlexNetwork 10500 SERIES Скачать руководство пользователя страница 184

Страница: 184 / 407

173

<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"

xmlns:hp="http://www.hp.com/netconf/base:1.0">

<get-config>

</source>

<Ifmgr>

</Interface>

</Interfaces>

</Ifmgr>

</top>

</filter>

</get-config>

</rpc>

Conditional match filtering

To implement a complex data filtering with digits and character strings, you can add a

match

attribute for a specific element.

Table 11

lists the conditional match operators.

Table 11 Conditional match operators

Operation

Operator

Remarks

More than

match="more:

value

More than the specified value. The supported data types
include date, digit, and character string.

Less than

match="less:

value

Less than the specified value. The supported data types
include date, digit, and character string.

Not less than

match="notLess:

value

Not less than the specified value. The supported data types
include date, digit, and character string.

Not more than

match="notMore:

value

Not more than the specified value. The supported data types
include date, digit, and character string.

Equal

match="equal:

value

Equal to the specified value. The supported data types include
date, digit, character string, OID, and BOOL.

Not equal

match="notEqual:

value

Not equal to the specified value. The supported data types
include date, digit, character string, OID, and BOOL.

Include

match="include:

string

Includes the specified string. The supported data types include
only character string.

Not include

match="exclude:

string

Excludes the specified string. The supported data types include
only character string.

Start with

match="startWith:

string

Starts with the specified string. The supported data types
include character string and OID.

End with

match="endWith:

string

Ends with the specified string. The supported data types
include only character string.

# Copy the following text to the client to retrieve extension information about the entity whose CPU
usage is more than 50%:

Содержание FlexNetwork 10500 SERIES
























































































































































































































































































































































































































Результаты поиска

Содержание FlexNetwork 10500 SERIES

Отзывы:

Похожие инструкции для FlexNetwork 10500 SERIES

Бренды по названию

Популярные бренды

HPE FlexNetwork 10500 SERIES, Руководство по настройке

Результаты поиска

Содержание FlexNetwork 10500 SERIES

Отзывы:

Похожие инструкции для FlexNetwork 10500 SERIES

Бренды по названию

Популярные бренды