HPE FlexNetwork 10500 SERIES, Руководство по настройке

Страница: 298 / 407

287
Timestamp
parameters
Description Example
no-year-date
Current date and time without year
information, in the format of MMM DD
hh:mm:ss:xxx.
Only logs that are sent to a log host support
this parameter.
<189>May 30 06:44:22
Sysname %%10FTPD/5/FTPD_LOGIN(l):
User ftp (192.168.1.23) has logged in
successfully.
May 30 06:44:22 is a timestamp in the
no-year-date format.
FIPS compliance
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see
Security Configuration Guide .
Information center configuration task list
Tasks at a glance
Perform at least one of the following tasks:
•
Outputting logs to the console
•
Outputting logs to the monitor terminal
•
Outputting logs to log hosts
•
Outputting logs to the log buffer
•
Saving logs to the log file
(Optional.) Managing security logs
(Optional.) Saving diagnostic logs to the diagnostic log file
(Optional.) Configuring the maximum size of the trace log file
(Optional.) Setting the minimum storage period for log files and logs in the log buffer
(Optional.) Enabling synchronous information output
(Optional.) Enabling duplicate log suppression
(Optional.) Configuring log suppression for a module
(Optional.) Disabling an interface from generating link up or link down logs
(Optional.) Enabling SNMP notifications for system logs
Outputting logs to the console
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enable the information
center.
info-center enable
By default, the information center
is enabled.