HP XP20000/XP24000 Скачать руководство пользователя страница 375

Страница: 375 / 448

Table 64 Error Codes — Part Code 7105

(continued)

Failure
Level

Severity
Level

Recommended Action

Error Message

Error
Number

Part
Code

Check the status of the
volume.

The selected volume is not a
reserved volume.

8575

7105

Check the contents, and retry.

No reserved volume is
available for use.

8576

7105

Stop the operation of the
Reserve volume setting, or
delete the Reserve volume.

The number of reserved
volumes to be defined
exceeds the maximum.

8577

7105

Check the contents, and retry.

The S-VOL is already paired
with a backup volume. The
S-VOL cannot be paired with
the target volume.

8578

7105

Define the reserve volume,
and then retry the operation.

No volume is defined as a
reserved volume.

8579

7105

You cannot use the volume.
Specify other volume, and
retry the operation.

The specified volume is for
backup servers only.

8580

7105

Check the contents, and retry.

The specified volume is not
for backup servers only.

8581

7105

Wait a few seconds, and
retry the operation.

The emulation type of the
target volume is being
changed.

8582

7105

Specify the volume of the
supported RAID level.

The RAID level of the
specified volume is not
supported.

8583

7105

Define the reserve volume,
and then retry the operation.

No volume is defined as a
reserved volume.

8584

7105

Stop the operation of the
Reserve volume setting, or
delete the Reserve volume.

The number of reserved
volumes exceeds the
maximum.

8585

7105

Check the contents, and retry.

The number of groups that
can be set in the same
subsystem is invalid.

8586

7105

Check the contents, and retry.

The number of pairs that can
be set in the same group is
invalid.

8587

7105

Check the contents, and retry.

The specified group number
is not set.

8588

7105

Check the contents, and retry.

The specified group name is
invalid.

8589

7105

Check the contents, and retry.

The group name and the
number do not match.

8590

7105

Check the contents, and retry.

The specified pair is already
set in another group.

8591

7105

Check the capacity of the
installed license key. To
create more pairs, purchase
a license key for larger
capacity.

The command was rejected,
because the licensed capacity
was exceeded.

8592

7105

Remote Web Console Error Codes 375

Содержание XP20000/XP24000

































































































































































































































































































































































































































































Результаты поиска

Содержание XP20000/XP24000

Отзывы:

Похожие инструкции для XP20000/XP24000

Бренды по названию

Популярные бренды

HP XP20000/XP24000, Руководство пользователя

Результаты поиска

Содержание XP20000/XP24000

Отзывы:

Похожие инструкции для XP20000/XP24000

Бренды по названию

Популярные бренды