HP Synergy 480 Gen10 Скачать руководство пользователя страница 69

Страница: 69 / 124

Installing a DIMM

The server supports up to 24 DIMMs.

Prerequisites

Before installing this option, be sure you have the following:

The components included with the hardware option kit

For more information on specific options, see the compute module QuickSpecs on the Hewlett Packard Enterprise

Hewlett Packard Enterprise website

website.

Procedure

1. Power down the compute module.

2. Remove the compute module.

3. Place the compute module on a flat, level work surface.

4. Remove the access panel.

5. Open the DIMM slot latches.

6. Install the DIMM.

7. Install the access panel.

8. Install the compute module in the rack.

9. Install the compute module.

10. Power up the compute module.

Use the BIOS/Platform Configuration (RBSU) in the UEFI System Utilities to configure the memory mode.

Installing a DIMM

Содержание Synergy 480 Gen10





























































































































Результаты поиска

Содержание Synergy 480 Gen10

Отзывы:

HP Synergy 480 Gen10, Руководство пользователя, Страница: 69 / 124

Результаты поиска

Содержание Synergy 480 Gen10

Отзывы: