HP Synergy 480 Gen10 Скачать руководство пользователя страница 47

Страница: 47 / 124

Installing the compute module

Procedure

1. Verify that the device bay is configured for a half-height compute module. For more information, see the setup and installation

guide for the frame on the Hewlett Packard Enterprise website

Hewlett Packard Enterprise website .

2. Remove the compute module end cap.

3. Prepare the compute module for installation by opening the compute module handle

4. Install the compute module.

Slide the compute module until it is fully inserted in the enclosure slot. Rotate the handle until it latches.

5. Review the compute module front panel LEDs to determine the compute module status. For more information on the compute

module LEDs, see " Component identification."

To remove the component, reverse the installation procedure.

Installing the compute module

Содержание Synergy 480 Gen10





























































































































Результаты поиска

Содержание Synergy 480 Gen10

Отзывы:

HP Synergy 480 Gen10, Руководство пользователя, Страница: 47 / 124

Результаты поиска

Содержание Synergy 480 Gen10

Отзывы: