HP Synergy 480 Gen10 Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 124

HP Synergy 480 Gen10 Скачать руководство пользователя страница 80

System requirements for

System requirements for persistent memory module

persistent memory module support

support

IMPORTANT:

IMPORTANT:

Hewlett Packard Enterprise recommends that you implement best-practice configurations such as clustered

configurations for high availability (HA).

Before installing persistent memory modules, make sure that the following components and software are available:

A supported HPE ProLiant Gen10 server or Synergy compute module using second-generation Intel Xeon Scalable processors. For
more information, see the product QuickSpecs on the Hewlett Packard Enterprise website
(https://www.hpe.com/support/persistentmemoryQS

https://www.hpe.com/support/persistentmemoryQS).

HPE DDR4 Standard Memory RDIMMs or LRDIMMs (the number will vary based on your chosen configuration).

Supported firmware and drives:

System ROM version 2.10 or later

Server Platform Services (SPS) Firmware version 04.01.04.296

HPE iLO 5 Firmware version 1.43

HPE Innovation Engine Firmware version 2.1.x or later

Download the required firmware and drivers from the Hewlett Packard Enterprise website
(https://www.hpe.com/info/persistentmemory

https://www.hpe.com/info/persistentmemory).

A supported operating system:

Windows Server 2012 R2 with persistent memory drivers from Hewlett Packard Enterprise

Windows Server 2016 with persistent memory drivers from Hewlett Packard Enterprise

Windows Server 2019

Red Hat Enterprise Linux 7.6 and later

Red Hat Enterprise Linux 8.0 and later

SUSE Linux Enterprise Server 12 SP4 and later

SUSE Linux Enterprise Server 15 with SUSE-SU-2019:0224-1 or later kernel update

SUSE Linux Enterprise Server 15 SP1 with SUSE-SU-2019:1550-1 or later kernel update

VMware vSphere 6.7 U2 + Express Patch 10 (ESXi670-201906002) or later (supports App Direct and Memory modes)

VMware vSphere 6.5 U3 or later (supports Memory mode)

Hardware and licensing requirements for optional encryption of the persistent memory modules:

HPE TPM 2.0 (local key encryption)

HPE iLO Advanced License (remote key encryption)

Key management server (remote key encryption)

For more information, see the Intel Optane persistent memory for HPE User Guide on the Hewlett Packard Enterprise website
(https://www.hpe.com/info/persistentmemory-docs

https://www.hpe.com/info/persistentmemory-docs).

System requirements for persistent memory module support

80

«
...
78
79
80
81
82
...
»

Содержание Synergy 480 Gen10





























































































































Отзывы:

Нет отзывов