HP Synergy 480 Gen10 Скачать руководство пользователя страница 91

Страница: 91 / 124

Overview

Use these instructions to install and enable an HPE TPM 2.0 Gen10 Kit in a supported compute module. This option is not supported on a

Gen9 and earlier compute module.

This procedure includes three sections:

1. Installing the Trusted Platform Module board.

2. Enabling the Trusted Platform Module.

3. Retaining the recovery key/password.

HPE TPM 2.0 installation is supported with specific operating system support such as Microsoft Windows Server 2012 R2 and later. For

more information about operating system support, see the product QuickSpecs on the Hewlett Packard Enterprise website
(https://www.hpe.com/info/qs

https://www.hpe.com/info/qs). For more information about Microsoft Windows BitLocker Drive Encryption feature, see the Microsoft

website (https://www.microsoft.com

https://www.microsoft.com).

CAUTION:

CAUTION: If the TPM is removed from the original compute module and powered up on a different compute module,

data stored in the TPM including keys will be erased.

IMPORTANT:

IMPORTANT: In UEFI Boot Mode, the HPE TPM 2.0 Gen10 Kit can be configured to operate as TPM 2.0 (default) or TPM

1.2 on a supported compute module. In Legacy Boot Mode, the configuration can be changed between TPM 1.2 and TPM

2.0, but only TPM 1.2 operation is supported.

Overview

Содержание Synergy 480 Gen10





























































































































Результаты поиска

Содержание Synergy 480 Gen10

Отзывы:

HP Synergy 480 Gen10, Руководство пользователя, Страница: 91 / 124

Результаты поиска

Содержание Synergy 480 Gen10

Отзывы: