HP Synergy 480 Gen10 Скачать руководство пользователя страница 14

Страница: 14 / 124

Smart Carrier NVMe (SCN) drive LED definitions

The NVMe drive is a PCIe bus device. A device attached to a PCIe bus cannot be removed without allowing the device and bus to

complete and cease the signal/traffic flow.

CAUTION:

CAUTION: Do not remove an NVMe drive from the drive bay while the Do not remove LED is flashing. The Do not

remove LED flashes to indicate that the device is still in use. Removing the NVMe drive before the device has completed

and ceased signal/traffic flow can cause loss of data.

Item

LED

Status

Definition

Locate

Solid blue

The drive is being identified by a host application.

Flashing blue

The drive carrier firmware is being updated or requires an update.

Activity
ring

Rotating green

Drive activity

Off

No drive activity

Drive
status

Solid green

The drive is a member of one or more logical drives.

Flashing green

The drive is doing one of the following:

Rebuilding

Performing a RAID migration

Performing a stripe size migration

Performing a capacity expansion

Performing a logical drive extension

Erasing

Flashing
amber/green

The drive is a member of one or more logical drives and predicts the drive will
fail.

Flashing amber

The drive is not configured and predicts the drive will fail.

Solid amber

The drive has failed.

Off

The drive is not configured by a RAID controller.

Do not
remove

Solid white

Do not remove the drive. The drive must be ejected from the PCIe bus prior to
removal.

Flashing white

The drive ejection request is pending.

Off

The drive has been ejected.

Power

Solid green

Do not remove the drive. The drive must be ejected from the PCIe bus prior to
removal.

Flashing green

The drive ejection request is pending.

Off

The drive has been ejected.

Smart Carrier NVMe (SCN) drive LED definitions

Содержание Synergy 480 Gen10





























































































































Результаты поиска

Содержание Synergy 480 Gen10

Отзывы:

HP Synergy 480 Gen10, Руководство пользователя, Страница: 14 / 124

Результаты поиска

Содержание Synergy 480 Gen10

Отзывы: