HP Synergy 480 Gen10 Скачать руководство пользователя страница 12

Страница: 12 / 124

Smart Carrier (SC) drive LED definitions

Item

LED

Status

Definition

Locate

Solid blue

The drive is being identified by a host application.

Flashing blue

The drive carrier firmware is being updated or requires an update.

Activity
ring

Rotating green

Drive activity

Off

No drive activity

Do not
remove

Solid white

Do not remove the drive. Removing the drive causes one or more of the logical
drives to fail.

Off

Removing the drive does not cause a logical drive to fail.

Drive
status

Solid green

The drive is a member of one or more logical drives.

Flashing green

The drive is doing one of the following:

Rebuilding

Performing a RAID migration

Performing a strip size migration

Performing a capacity expansion

Performing a logical drive extension

Erasing

Spare part activation

Flashing
amber/green

The drive is a member of one or more logical drives and predicts the drive will
fail.

Flashing amber

The drive is not configured and predicts the drive will fail.

Solid amber

The drive has failed.

Off

The drive is not configured by a RAID controller or a spare drive.

Smart Carrier (SC) drive LED definitions

Содержание Synergy 480 Gen10





























































































































Результаты поиска

Содержание Synergy 480 Gen10

Отзывы:

HP Synergy 480 Gen10, Руководство пользователя, Страница: 12 / 124

Результаты поиска

Содержание Synergy 480 Gen10

Отзывы: