manualshive.com logo in svg

HP StorageWorks 1/8, Руководство пользователя и сервисное руководство, Страница: 180 / 204

Поделиться
Скачать
HP StorageWorks 1/8 Скачать руководство пользователя страница 180

Laser compliance notices

English laser notice

This device may contain a laser that is classified as a Class 1 Laser Product in accordance with U.S.
FDA regulations and the IEC 60825-1. The product does not emit hazardous laser radiation.

WARNING!

Use of controls or adjustments or performance of procedures other than those specified herein or in
the laser product's installation guide may result in hazardous radiation exposure. To reduce the risk
of exposure to hazardous radiation:

•

Do not try to open the module enclosure. There are no user-serviceable components inside.

•

Do not operate controls, make adjustments, or perform procedures to the laser device other than
those specified herein.

•

Allow only HP Authorized Service technicians to repair the unit.

The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
implemented regulations for laser products on August 2, 1976. These regulations apply to laser
products manufactured from August 1, 1976. Compliance is mandatory for products marketed in the
United States.

Dutch laser notice

Regulatory compliance and safety

180

Содержание StorageWorks 1/8













































































































































































































Отзывы:

Нет отзывов