HP StorageWorks 1/8 Скачать руководство пользователя страница 103 | Manualshive

Страница: 103 / 204

HP StorageWorks 1/8 Скачать руководство пользователя страница 103

5.

While the test is running, the screen displays progress as shown:

Wellness test

. The second line

on the display shows the number of cycles completed. The

Ready

LED blinks until the test is

complete.

6.

When the test is complete, the screen displays the test completion status, including any recoveries
or errors that may have occurred. See “

Error codes

” on page 129 for a list of error codes and

error messages.

NOTE:

To stop the wellness test, press the

Cancel

button.

Upgrading firmware (Support > Autoloader FW Upgrade, Support > Drive FW Upgrade)

The Autoloader allows two types of firmware to be upgraded — one for the tape drive and the other
for the Autoloader itself. You can upgrade both types of firmware from a USB flash drive. You can
also upgrade the tape drive firmware from a firmware upgrade tape. Access to this feature requires
the administrator password.

To upgrade Autoloader firmware from a USB flash drive:

1.

Download current Autoloader firmware using HP Library & Tape Tools or from the HP support
website: http://www.hp.com/support/storage. Copy the firmware onto the USB flash drive.

TIP:

The display will only show the first 16 characters of the file name. If the USB drive has multiple
firmware files, ensure that you can distinguish the files from the first 16 characters in their file
names.

2.

Insert the USB flash drive into the USB port on the back of the device.

3.

From the Home screen, press

Previous

or

Next

until the screen displays

Support

. Press

Enter

to

select.

4.

Press

Previous

or

Next

until the screen displays

Autoloader FW upgrade

. Press

Enter

to select.

5.

Enter the administrator password if prompted.

6.

Press

Previous

or

Next

until the screen displays the filename of the Autoloader firmware file on

the USB drive. Press

Enter

to select the firmware file.

7.

If the upgrade failed, press

Enter

to display the error code and message describing the cause of

the failure.

8.

Remove the USB flash drive from the USB port.

To upgrade drive firmware from a USB flash drive:

HP StorageWorks 1/8 G2 Tape Autoloader User and service guide

103

«
...
101
102
103
104
105
...
»

Содержание StorageWorks 1/8













































































































































































































Отзывы:

Нет отзывов