HP StorageWorks 1/8 Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 204

HP StorageWorks 1/8 Скачать руководство пользователя страница 104

1.

Download current tape drive firmware using HP Library & Tape Tools or from the HP support
website: http://www.hp.com/support/storage. Copy the firmware onto the USB flash drive.

TIP:

The display will only show the first 16 characters of the file name. If the USB drive has
multiple firmware files, ensure that you can distinguish the files from the first 16 characters
in their file names.

2.

Insert the USB flash drive into the USB port on the back of the device.

3.

From the Home screen, press

Previous

or

Next

until the screen displays

Support

. Press

Enter

to

select.

4.

Press

Previous

or

Next

until the screen displays

Drive FW Upgrade

. Press

Enter

to select.

5.

Enter the administrator password if prompted.

6.

Press

Previous

or

Next

until the screen displays

Drive FW Upgrade by USB

. Press

Enter

to select.

7.

Press

Previous

or

Next

until the screen displays the filename of the drive firmware file on the USB

drive. Press

Enter

to select the firmware file.

8.

If the upgrade failed, press

Enter

to display the error code and message describing the cause of

the failure.

9.

Remove the USB flash drive from the USB port.

To update drive firmware from a firmware upgrade tape:

1.

Load a firmware upgrade tape into the mailslot or any open slot. If all slots are full, remove a
data tape to make room for the firmware upgrade tape.

2.

From the Home screen, press

Previous

or

Next

until the screen displays

Support

. Press

Enter

to

select.

3.

Press

Previous

or

Next

until the screen displays

Drive FW Upgrade

. Press

Enter

to select.

4.

Enter the administrator password if prompted.

5.

Press

Previous

or

Next

until the screen displays

Drive FW Upgrade by Tape

. Press

Enter

to select.

6.

Press

Previous

or

Next

until the screen displays one of the following:

Drive 1.

The second line

may read:

Firmware: G39W

or

All Drives

. Press

Enter

to select the appropriate drive to upgrade.

7.

Press

Previous

or

Next

until the display shows the correct slot location of the firmware upgrade

tape installed in the device (example)

FW Tape Location Slot: Mailslot

. Press

Enter

to select the

correct firmware tape location. The screen displays

Upgrading Drive FW

.

8.

When the update is complete, the screen displays either

Success Export FW Tape

, or

Failed Export

FW Tape

. If the upgrade failed, press

Enter

to display the error code and message describing

the cause of the failure.

9.

Remove the firmware upgrade tape from the device using either the mailslot or by removing the
magazine where the tape has been placed.

Viewing logs (Support > Autoloader Error Log)

The Autoloader keeps a log of recent error and warning messages. See “

Error codes

” on page 129

for more information about error codes.

To access the error or warning log:

Operating the Tape Autoloader

104

«
...
102
103
104
105
106
...
»

Содержание StorageWorks 1/8













































































































































































































Отзывы:

Нет отзывов