HP StorageWorks 1/8, Руководство пользователя и сервисное руководство, Страница: 15 / 204

1 Features and overview
The Autoloader provides a compact, high-capacity, low-cost solution for simple, unattended data
backup. This unique design houses up to eight tape cartridges in a compact 1U form factor with easy
access to tape cartridges via two removable magazines and a configurable mailslot. Each magazine
can hold up to four cartridges.
The Autoloader can support Ultrium half-height tape drives. To see the tape drives currently available
for the 1/8 G2 Tape Autoloader, see the MSL QuickSpecs at
http://www.hp.com/go/tape . For a
list of all supported configurations, go to http://www.hp.com/go/ebs .
The Autoloader is compatible with most operating systems and environments that support the SAS,
parallel SCSI, or Fibre Channel interfaces. However, the Autoloader requires either direct support
from the operating system or a compatible backup application to take full advantage of its many
features. To verify compatibility, go to http://www.hp.com/go/ebs.
The Autoloader uses the interface types described in Table 1 . The parallel SCSI Tape Autoloader uses
a single SCSI ID with two logical unit numbers (LUNs) — one for the tape drive and the other for the
robotic.
Table 1 Model and interface type
SCSI ID Interface LTO generation
4 Ultra 160 SCSI LVD/SE LTO-2
4 Ultra 320 SCSI LVD, SAS LTO-3, LTO-4
NA Fibre Channel, SAS LTO-5
Maximum storage capacity, maximum data transfer rates, and tape cartridges are specified in Table
2 , Table 3 , Table 4 , and Table 5 on page 16.
Table 2 Ultrium 448 1/8 G2 Tape Autoloader specifications
Specification Characteristic
Native: 1.6 TB (8 x 200 GB) Compressed (2:1): 3.2 TB
Maximum storage capacity, 8
data cartridges
Native: 24 MB/s (86 GB/hr) Compressed (2:1): 48 MB/s (172 GB/hr) Maximum data transfer rate
HP LTO2 Ultrium 400 GB Data Cartridge, red, part number C7972A Data cartridges
HP StorageWorks 1/8 G2 Tape Autoloader User and service guide 15