HP SimpliVity OmniCube CN-1400 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 66

HP SimpliVity OmniCube CN-1400 Скачать руководство пользователя страница 16

16

About hardware upgrades

• EMC EN 55022:2010/CISPR 22:2010 EN 55024:2010/CISPR 24:2010 EN 61000-3-2:2006 +A1:2009
• +A2:2009/IEC 61000-3-2:2005 +A1:2008 +A2:2009 (Class D) EN 61000-3-3:2008/IEC 61000-3-3:2008
• SAFETY EN 60950-1:2006 +A1:2010 +A2:2013 +A11:2009 +A12:2011/IEC 60950-1:2005 ed2

+A1:2009 EN 62311:2008

• RoHS EN 50581:2012
• IEC 60950-1/A2:2013
• PTI-1406324-000 od 09.07.2014
• US CFR Title 47, FCC Part 2, 15 ANSI C63.4 2009 Canadian ICES-3(A)/NMB-3(A), Issue 5
• SM SR EN 60950-1:2010/A1:2012,GOST 30805.22:2002
• GB17625. 1-2012;GB4943. 1-2011;GB9254-2008 (CLASS A)
• ZEK 01.4-08

About hardware upgrades

If you need to upgrade the server hardware components, contact

Customer Support

.

WARNING:

Never install additional options other than those approved for installation by

Customer

Support

. Doing so will void your warranty and might cause serious server instability and

potential data loss.

About firmware revisions

The OmniStack software requires that each supported platform is running a specific firmware revision.
To avoid compatibility issues, contact

Customer Support

before making any firmware changes.

NOTE:

If your server, or any management software, has automatic software updates enabled, disable

this feature to avoid installing unsupported firmware revisions.

«
...
14
15
16
17
18
...
»

Содержание SimpliVity OmniCube CN-1400



































































Отзывы:

Нет отзывов