HP ProLiant DL60 Gen9 Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 127

background image

Software and configuration utilities 101

This remote deployment capability eliminates the need for the user to be physically present at the server

to perform a firmware update.

Drivers

IMPORTANT:

Always perform a backup before installing or updating device drivers.

The server includes new hardware that may not have driver support on all OS installation media.
If you are installing an Intelligent Provisioning-supported OS, use Intelligent Provisioning (on page

and its Configure and Install feature to install the OS and latest supported drivers.
If you do not use Intelligent Provisioning to install an OS, drivers for some of the new hardware are

required. These drivers, as well as other option drivers, ROM images, and value-add software can be

downloaded as part of an SPP.
If you are installing drivers from SPP, be sure that you are using the latest SPP version that your server

supports. To verify that your server is using the latest supported version and for more information about

SPP, see the Hewlett Packard Enterprise website (

http://www.hpe.com/servers/spp/download

To locate the drivers for a particular server, go to the Hewlett Packard Enterprise Support Center website

http://www.hpe.com/support/hpesc

). Under

Select your HPE product

, enter the product name or

number and click

Go

.

Software and firmware

Software and firmware should be updated before using the server for the first time, unless any installed

software or components require an older version.
For system software and firmware updates, use one of the following sources:

•

Download the SPP ("

Service Pack for ProLiant

" on page

) from the Hewlett Packard Enterprise

website (

http://www.hpe.com/servers/spp/download

•

Download individual drivers, firmware, or other systems software components from the server

product page in the Hewlett Packard Enterprise Support Center website

http://www.hpe.com/support/hpesc

Operating System Version Support

For information about specific versions of a supported operating system, refer to the operating system

support matrix (

http://www.hpe.com/info/ossupport

Version control

The VCRM and VCA are web-enabled Insight Management Agents tools that SIM uses to schedule

software update tasks to the entire enterprise.

•

VCRM manages the repository for SPP. Administrators can view the SPP contents or configure

VCRM to automatically update the repository with internet downloads of the latest software and

firmware from Hewlett Packard Enterprise.

•

VCA compares installed software versions on the node with updates available in the VCRM

managed repository. Administrators configure VCA to point to a repository managed by VCRM.

For more information about version control tools, see the

Systems Insight Manager User Guide,

the

Version Control Agent User Guide

, and the

Version Control Repository Manager User Guide

on the

Hewlett Packard Enterprise website (

http://www.hpe.com/info/enterprise/docs

1.

Select

HP Insight Management

from the available options in Products and Solutions.

«
...
99
100
101
102
103
...
»

Содержание ProLiant DL60 Gen9
































































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL60 Gen9

iDataPlex dx320 6385

Бренд: IBM Страницы: 60

9123710 - eServer OpenPower 710

Бренд: IBM Страницы: 70

Бренд: Thecus Страницы: 120

Бренд: Fibrenetix Страницы: 17

Бренд: Cabletron Systems Страницы: 100

Бренд: RaidSonic Страницы: 2

CallPilot 1005r

Бренд: Nortel Страницы: 74

Communication Server 100

Бренд: Nortel Страницы: 214

CHALLENGE CMN A012B

Бренд: Silicon Graphics Страницы: 40

InfiniteStorage 120

Бренд: Silicon Graphics Страницы: 42

Бренд: VBrick Systems Страницы: 44

Бренд: Intel Страницы: 56

S5000VCL - Server Board Motherboard

Бренд: Intel Страницы: 74

Бренд: Intel Страницы: 82

TIGI2U - Carrier Grade Server

Бренд: Intel Страницы: 114

Бренд: Russound Страницы: 48

Бренд: Gateway Страницы: 60

Бренд: Supero Страницы: 82

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды