Removal and replacement procedures 67
CAUTION:
To prevent damage to the cache module during installation, be sure the cache
module is fully inserted before pressing down.
Capacitor pack
CAUTION:
In systems that use external data storage, be sure that the server is the first unit to be
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the drives as failed when the server is powered up.
To remove the component:
1.
Power down the server (on page
31
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
32
).
o
Remove the server from the rack (on page
34
).
4.
Remove the access panel ("
Access panel
" on page
37
).
5.
If the cache module is installed in the system board, remove the primary PCI riser cage ("
PCI riser cage
"
on page
57
).
6.
If the existing cache module is connected to a capacitor pack, observe the FBWC module LEDs:
o
If a backup is in progress, wait for the backup to complete.
o
If the backup is complete, or if the cache has failed, remove the controller from the server, and then
continue with the next step.
7.
Disconnect the capacitor pack cable from the cache module.
Содержание ProLiant DL380e Gen8
